WarBerryPi - Turn your Raspberry Pi into a War Machine

Usage
To get a list of all options and switches use:

sudo python warberry.py -h

Parameters:
-h,  --help         [*] Print this help banner
-m,  --man          [*] Prints WarBerry's Man Page
-A,  --attack       [*] Run All Enumeration Scripts
-S,  --sniffer      [*] Run Sniffing Modules Only
-C,  --clear        [*] Clear Output Directories
-F,  --fulltcp      [*] Full TCP Port Scan
-T,  --toptcp       [*] Top Port Scan
-U,  --topudp       [*] Top UDP Port Scan

example usage: sudo python warberry.py -A
               sudo python warberry.py --attack
               sudo python warberry.py -C

Installation
Optional: Change the hostname of the RaspberryPi to WarBerry
sudo nano /etc/hosts
sudo nano /etc/hostname
Reboot the WarBerry for the changes to take effect
Create a directory under /home/pi
sudo mkdir WarBerry
Create the Results subdirectory in /WarBerry
sudo mkdir Results
Download WarBerry by cloning the Git repository:
sudo git clone https://github.com/secgroundzero/warberry.git

Important
The tool in case of MAC address filtering enumerates by default the subnets specified under /home/pi/WarBerry/warberry/discover . This is done for the tool to run quicker. If you want to enumerate more subnets either add the subnets in that file or change line 154 in rest_bypass.py so that it does not read from the file.

Dependencies

• sudo apt-get install nbtscan
• sudo apt-get install python-scapy
• sudo apt-get install tcpdump
• sudo apt-get install nmap
• sudo pip install python-nmap
• sudo pip install ipaddress
• sudo apt-get install ppp
• sudo apt-get install sg3-utils
• sudo apt-get install netdiscover
• sudo apt-get install macchanger
• sudo git clone https://github.com/DanMcInerney/net-creds.git #install in /home/pi/WarBerry/Tools/

Extra Tools for Post Exploitation. Best to install in /home/pi/WarBerry/Tools/ directory

• sudo apt-get install onesixtyone
• sudo apt-get install nikto
• sudo apt-get install hydra
• sudo apt-get install john
• sudo apt-get install w3af-console
• sudo apt-get install ettercap-text-only
• sudo git clone https://github.com/stasinopoulos/commix.git
• sudo git clone https://github.com/sqlmapproject/sqlmap.git
• sudo git clone https://github.com/CoreSecurity/impacket.git
• sudo git clone https://github.com/samratashok/nishang.git
• sudo git clone https://github.com/SpiderLabs/Responder.git
• sudo git clone https://github.com/sophron/wifiphisher.git
• sudo git clone https://github.com/Dionach/CMSmap.git
• sudo git clone https://github.com/PowerShellMafia/PowerSploit.git

Aircrack Installation

• sudo apt-get -y install libssl-dev
• sudo wget http://download.aircrack-ng.org/aircrack-ng-1.2-beta1.tar.gz
• sudo tar -zxvf aircrack-ng-1.2-beta1.tar.gz
• cd aircrack-ng-1.2-beta1
• sudo make
• sudo make install
• sudo airodump-ng-oui-update
• sudo apt-get -y install iw
• sudo wget https://download.sysinternals.com/files/SysinternalsSuite.zip

ScreenShots


Running the tool with a switch



Connect to GND and port 23 pins on the RPi.



Script for autorunning with a switch

#!/usr/bin/env python2.7
import RPi.GPIO as GPIO
import subprocess
GPIO.setmode(GPIO.BCM)

# GPIO 23 set up as input. It is pulled up to stop false signals
GPIO.setup(23, GPIO.IN, pull_up_down=GPIO.PUD_UP)

print "it will connect GPIO port 23 (pin 16) to GND (pin 6)\n"

print "Waiting for falling edge on port 23"

try:
    GPIO.wait_for_edge(23, GPIO.FALLING)
    subprocess.call(["python /home/pi/WarBerry/warberry/warberry.py -A"])

except KeyboardInterrupt:
    GPIO.cleanup()       # clean up GPIO on CTRL+C exit
GPIO.cleanup()           # clean up GPIO on normal exit